Product concept
Wedid believes that everyone is full of curiosity, deserves leading a creative life and has the right to experience science. In this generation that energy becomes less and pollutant becomes more, everybody should have the responsibility of environmental protection. Therefore, Wedid combine the elements of creativity, environmental protection and scientific experience to announce to all people in the most practical way that the feature that water which is common in our daily life can be split to generate electricity.
Everybody must know that water can be used to do a lot of things. Water can be split to produce electricity. I believe that some people would be aware of this usage of water. But if this concept of water usage does not be explained clearly and exposed to human being. It would still be a vague concept.
instruction
This reture clock is eco-friendly products with the following functions including:
Time, day & date
Temperature
Countdown timer
Alarm clock
No batteries require only water operate but in order to maintain constant supply of enery, simply refill the water as the water evaporates, typically every 2 to 3 monmths.
Simply rotate the clock 90° to change the modes - Time, Temperature, Alarm, and Timer
This is four in one product. It is very convenient.You can not miss.
Temperature
Countdown timer
Alarm clock
No batteries require only water operate but in order to maintain constant supply of enery, simply refill the water as the water evaporates, typically every 2 to 3 monmths.
Simply rotate the clock 90° to change the modes - Time, Temperature, Alarm, and Timer
This is four in one product. It is very convenient.You can not miss.
part1
1.First please take out the water battery
2.To add some water to about 3/4 lever , please do not fill the full container.
3.Put the water battery back. Please be keep the surface dry to avoid rust.
Part2
1. Open the rubber piston
2. Use dropper to add water to around 1cm height
3.After waiting for several seconds,the clock will be running.(Please press "RESET" if it doesn't run after 2 minutes)
Part3
Function changes:to turn the clock to 90°/180°,then it can change the functions.
1.First please take out the water battery
2.To add some water to about 3/4 lever , please do not fill the full container.
3.Put the water battery back. Please be keep the surface dry to avoid rust.
Part2
1. Open the rubber piston
2. Use dropper to add water to around 1cm height
3.After waiting for several seconds,the clock will be running.(Please press "RESET" if it doesn't run after 2 minutes)
Part3
Function changes:to turn the clock to 90°/180°,then it can change the functions.
And last, Close water inlet cap.
BUY
https://wedid.en.taiwantrade.com/product/water-power-blue-multifunction-clock-1478690.htmlhttps://wedid.en.taiwantrade.com/product/water-power-multifunction-clock-green-1478725.html
Contact
wedid@so-net.net.tw
留言
張貼留言